MARKINGAFG
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| MAX6138CEXR25-T | Maxim Integrated | SC70-3 | 3 | 0.1%,25PPM,SC70并联型电压基准与多种反向击穿电压 |
| MAX6409BS39-T | Maxim Integrated | UCSP-4 | 4 | 电压检测器,采用4焊球(2×2)芯片级封装 |
| FAN2503S26 | Fairchild | SOT-23-5 | 5 | 2.6V 150 mA CMOS LDO Regulator |
| MAX6138CEXR25 | Maxim Integrated | SC70-3 | 3 | Shunt Voltage Reference |
| MAX6409BS39 | Maxim Integrated | UCSP-4 | 4 | Voltage Detector |
| MAX6476TA33AD3 | Maxim Integrated | TQFN-8 | 8 | 300mA LDO Linear Regulator with Internal Microprocessor Reset Circuit |
| MAX6642ATT9A | — | TQFN-6 | 6 | ±1°C, SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm |
| MAX6736XKSHD3 | Maxim Integrated | SC70-5 | 5 | Low-Power Dual-/Triple-Voltage SC70 μP Supervisory Circuits |
| MAX6835HXSD0 | Maxim Integrated | SC70-4 | 4 | Ultra-Low-Voltage Voltage Detector and uP Reset Circuit |
| MCP1603-250I/MC | — | DFN-2X3-8 | 8 | 2.0 MHz, 500 mA Synchronous Buck Regulator |
| S-873059CUP-AFG | Seiko Instruments | SOT-89-5 | 5 | High Withstand-Voltage Voltage Regulator with Reset Function |
| TPS60213DGS | Texas Instruments | MSOP-10 | 10 | Regulated 3.3-V 50-mA Low-Ripple Charge Pump with Ultra Low Operating Current |
| SN74AHC1G14DCKR | — | SC-70-5 | 5 | Single Schmitt-Trigger Inverters |
| TPS60213DGSG4 | Texas Instruments | — | 10 | Regulated 3.3-V 50-mA Low-Ripple Charge Pump with Ultra Low Operating Current |
| TPS60213DGSR | Texas Instruments | — | 10 | Regulated 3.3-V 50-mA Low-Ripple Charge Pump with Ultra Low Operating Current |
| MAX6835H-XSD0 | Maxim Integrated | SC70-4 | — | — |
| MAX6736-XKSHD3 | Maxim Integrated | SC70-5 | — | — |
| MAX6138C-EXR25 | Maxim Integrated | SC-70 | — | — |
| MAX6409-BS39 | Maxim Integrated | 4/UCSP | — | — |
| MAX6476-TA33AD3 | Maxim Integrated | 6/QFN-3X3THIN | — | — |
| MCP1603T-250I/MC | — | DFN-2X3-8 | — | 2.0 MHz, 500 mA Synchronous Buck Regulator |
| P3I2005AG-08SR | — | SOIC-8 | — | General Purpose Peak EMI Reduction IC |
| X9317ZM8 | — | MSOP-8 | — | Digitally Controlled Potentiometer (XDCP) |
Markings easily confused with AFG
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (SC70-3)
513 marking codes are recorded for this package; the most common are listed here.
Other markings from Maxim Integrated
4519 marking codes are recorded for this manufacturer; the most common are listed here.