MARKINGAGO
Matching part numbers
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| MAX4038ETA | Maxim Integrated | TDFN-8EP | 8 | Low IBIAS, +1.4V/800nA, Rail-to-Rail Op Amp with +1.2V Buffered Reference |
| MAX4798ETT | Maxim Integrated | TDFN-6EP | 6 | 450mA/500mA Current-Limit Switches |
| MAX6383XR29D3 | Maxim Integrated | SC70-3 | 3 | Single/Dual Low-Voltage, Low-Power uP Reset Circuit |
| MAX6467XS29D3 | Maxim Integrated | SC70-4 | 4 | Microprocessor Supervisory Reset Circuit with Edge-Triggered, One-Shot Manual Reset |
| MAX6743XKYHD3 | Maxim Integrated | SC70-5 | 5 | Low-Power Dual-/Triple-Voltage SC70 μP Supervisory Circuits |
| TPS77401DGK | Texas Instruments | MSOP-8 | 8 | Single Output LDO, 250mA, Adj.(1.5 to 5.5V), Fast Transient Response, PowerGood (PG) Output |
| AME8800JEEV | AME | SOT-25 | 5 | LDO, 2.85V±1.5%, 300mA |
| AME8800JEEVL | AME | TSOT-25 | 5 | LDO, 2.85V±1.5%, 300mA |
| AME8800JEEVY | AME | TSOT-25 | 5 | LDO, 2.85V±1.5%, 300mA |
| AME8800JEEVZ | AME | SOT-25 | 5 | LDO, 2.85V±1.5%, 300mA |
| MAX4038ETA-T | Maxim Integrated | 8 TDFN-EP* | 8 | 低IBIAS、+1.4V/800nA、满摆幅运算放大器,带有+1.2V缓冲基准 |
| X93156WM8I | Intersil | MSOP-8 | 8 | — |
| TPS77401DGKG4 | Texas Instruments | — | 8 | 250-mA LDO Regulators with Power Good |
| TPS77401DGKR | Texas Instruments | — | 8 | 250-mA LDO Regulators with Power Good |
| MAX6383-XR29D3 | Maxim Integrated | SC-70 | — | — |
| MAX6467-XS29D3 | Maxim Integrated | SC70-4 | — | — |
Markings easily confused with AGO
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (SC70-4)
262 marking codes are recorded for this package; the most common are listed here.
Other markings from Maxim Integrated
4519 marking codes are recorded for this manufacturer; the most common are listed here.