MARKINGAMS
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| BFP420 | Siemens | SOT-343 | 4 | NPN硅RF晶体管 |
| BSS64 | Siemens | SOT-23 | 3 | 驱动晶体管(NPN) |
| SN74AHC1G125DCKT | — | SC-70-5 | 5 | Single Bus Buffers with 3-State Outputs |
| BFP420F | SIE | TSFP-4 | 4 | NPN硅RF晶体管 |
| MAX6464XR46 | Maxim Integrated | SC70-3 | 3 | Ultra-Low-Power Voltage Detector and μP Supervisory Circuit |
| MAX6601TA9A | — | QFN-8 | 8 | — |
| MAX6736XKSID3 | Maxim Integrated | SC70-5 | 5 | Low-Power Dual-/Triple-Voltage SC70 μP Supervisory Circuits |
| TPS62304DRC | Texas Instruments | VSON-10 | 10 | 1.2V, 500-mA, 3-MHz Step-Down Converter |
| 2SA1896 | Sanyo | PCP | 3 | Low-Saturation Voltage Transistors |
| SN74AHC1G125DRLR | — | SOT-553 | 5 | Single Bus Buffers with 3-State Outputs |
| MAX6464XR46-T | Maxim Integrated | SOT-323 | 3 | 4.6V±2.5%, -Reset PPO, 150ms |
| 2SA1896-S | Sanyo | PCP | 3 | DC/DC-Conv, 25V, 2.5A, 1.3W, B=140..280, 400MHz |
| XC6114D624MR | Torex Semiconductor | SOT-25 | 5 | 2.4V±2%, ±Reset PPO, Wt=1.6s, Rt=100ms |
| SN74AHC1G125DCKR | TEXAS | SOT-353/SC-88A/SC70-5/TSSOP5 | — | Integrated Circuit(IC) > Logic circuit > Buffer/Line Driver |
| 2SA1896S-TD | Sanyo | SOT-89/PCP/SC-62 | — | Bipolar Junction Transistors(BJT) > PNP |
| 74AHC1G125DRLRG4 | Texas Instruments | — | 5 | Single Bus Buffer Gate with 3-State Output |
| TPS62304DRCR | Texas Instruments | — | 10 | 1.2V, 500-mA, 3-MHz Step-Down Converter in QFN or Chip-Scale |
| MAX6464-XR46 | Maxim Integrated | SC-70 | — | — |
Markings easily confused with AMS
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (PCP)
239 marking codes are recorded for this package; the most common are listed here.
Other markings from Maxim Integrated
4519 marking codes are recorded for this manufacturer; the most common are listed here.