MARKINGCAT
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| 2SC3645 | Sanyo | PCP | 3 | NPN Epitaxial Planar Silicon Transistor |
| NCV303LSN34T1G | onsemi | TSOP-5 | 5 | 3.4V Voltage Detector with Programmable Delay |
| TPS62410DRC | Texas Instruments | DRC-10 | 10 | 2.25MHZ 2x800mA Dual Step-Down Converter with 1-Wire Interface |
| SMCJ8.5A | Gal | DO-214AB/SMC | 2 | Vbr=9.44..10.4V, Vrwm=8.5V, 104.2A, 1500W(1ms) |
| 2SC3645-T | Sanyo | PCP | 3 | HV, Sw, 180V, 200mA, 500mW, B=200..400, >150MHz |
| NCV303LSN34T1 | onsemi | TSOP-5 | 5 | 3.4V±1.5%, -Reset ODO |
| XC6116A025MR | Torex Semiconductor | SOT-25 | 5 | 2.5V±2%, -MR, ±Reset PPO, Rt=3.13ms |
| NCP304LSQ280T1G | onsemi | SC-82AB/SOT343 | 4 | Voltage Detector Series with Complementary Output |
| NCV303LSN34T1G* | onsemi | TSOP-5 | 5 | Voltage Detector Series with Programmable Delay and Open Drain N-Channel Output |
| TPS62410DRCR | Texas Instruments | — | 10 | 2.25MHZ 2x800mA Dual Step-Down Converter with 1-Wire Interface in QFN |
| TPS62410DRCRG4 | Texas Instruments | — | 10 | 2.25MHZ 2x800mA Dual Step-Down Converter with 1-Wire Interface in QFN |
| TPS62410DRCT | Texas Instruments | — | 10 | 2.25MHZ 2x800mA Dual Step-Down Converter with 1-Wire Interface in QFN |
| TPS62410DRCTG4 | Texas Instruments | — | 10 | 2.25MHZ 2x800mA Dual Step-Down Converter with 1-Wire Interface in QFN |
Markings easily confused with CAT
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (TSOP-5)
489 marking codes are recorded for this package; the most common are listed here.
Other markings from Texas Instruments
23704 marking codes are recorded for this manufacturer; the most common are listed here.