MARKINGAIG
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| MAX4835ETT30BD3 | Maxim Integrated | TDFN-6 | 6 | 250mA LDO Linear Regulators with Current-Limiting Switch |
| MAX6389XS23D2 | Maxim Integrated | SC70-4 | 4 | Single/Dual Low-Voltage, Low-Power uP Reset Circuit |
| MAX6740XKSGD3 | Maxim Integrated | SC70-5 | 5 | Low-Power Dual-/Triple-Voltage SC70 μP Supervisory Circuits |
| MAX8559TAJJ | Maxim Integrated | QFN-8 | 8 | Dual, 300mA, Low-Noise Linear Regulator with Independent Shutdown in UCSP or TDFN |
| MXD1816XR26 | Maxim Integrated | SC70-3 | 3 | Low-Power uP Reset Circuit |
| TPS3306-33DGK | Texas Instruments | MSOP-8 | 8 | Dual-Processor Supervisory Circuits with Power-Fail |
| MAX97220BETE | Maxim Integrated | QFN-16 | 16 | AF PA, 2.4..5.5V, 2x125mW(3V/32-£), shutdown |
| MAX8559ETAJJ | Maxim Integrated | 8 TDFN-EP** | 8 | Dual, 300mA, Low-Noise Linear Regulator with Independent Shutdown in UCSP or TDFN |
| MXD1816_R26 | Maxim Integrated | 3 SC70-3 | 3 | 低功耗、微处理器复位电路,3引脚SC70/SOT23封装 |
| TPS3306-33DGKG4 | Texas Instruments | — | 8 | Dual-Processor Supervisory Circuits with Power-Fail |
| TPS3306-33DGKR | Texas Instruments | — | 8 | Dual-Processor Supervisory Circuits with Power-Fail |
| TPS3306-33DGKRG4 | Texas Instruments | — | 8 | Dual-Processor Supervisory Circuits with Power-Fail |
| MXD1816-XR26 | Maxim Integrated | SC-70 | — | — |
Markings easily confused with AIG
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (TDFN-6)
89 marking codes are recorded for this package; the most common are listed here.
Other markings from Maxim Integrated
4519 marking codes are recorded for this manufacturer; the most common are listed here.