MARKINGQV
Matching part numbers
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| 1SMA9.0AT3 | onsemi | SMA | 2 | ZENER OVERVOLTAGE TRANSIENT SUPPRESSOR(TVS) |
| 1SV298 | Sanyo | CP4 | 4 | Pin Diodes |
| CPH5819 | — | CPH5 | 5 | N-Channel Silicon MOSFET and Schottky Barrier Diode |
| MCH5819 | Sanyo | MCPH5 | 5 | N-Channel Silicon MOSFET and Schottky Barrier Diode |
| MCP809T-460I/TT | Microchip | SOT-23 | 3 | 4.60 V Microprocessor Supervisory Circuit with Push-Pull Output |
| RTR040N03 | — | TSMT3 | 3 | 2.5V Drive Nch MOS FET |
| RP152L020A | Ricoh | DFN-1212-6 | 6 | LDO, Dual out, Vout1/Vout2=2.8V/1.8V±1%, 150mA, +CE |
| 1SMA9.0A | onsemi | 403B-01/SMA | 2 | Vrwm=9V±5%, 26A, 400W (1ms) |
| P6SMB36CA | Fag | DO-214AA/SMB | 2 | Vrwm=36V, 12A, 600W(1ms), Bidirectional |
| BD5339FVE | Rohm | VSOF-5 | 5 | 3.9V, +Reset PPO |
| BD5339G | Rohm | SSOP-5 | 5 | 3.9V, +Reset PPO |
| R1122N191A | Ricoh | SOT-23-5 | 5 | LDO, LN, -CE, 1.9V±2%, 150mA |
| 1SMA9.0AT3G | onsemi | SMA | 2 | 400 Watt SMA Transient Voltage Suppressor, 9.0 V Unidirectional |
| BD5339FVE-TR | Rohm | VSOF5 | — | Voltage Detector with Adjustable Delay Time |
| BD5339G-TR | Rohm | SOT-23-5 | — | Voltage Detector with Adjustable Delay Time |
| RTR040N03TL | — | TSMT3 | — | 2.5V Drive Nch MOS FET |
Markings easily confused with QV
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (SMA)
2163 marking codes are recorded for this package; the most common are listed here.
Other markings from Rohm
1547 marking codes are recorded for this manufacturer; the most common are listed here.