中文
Mr. Guo
Phone / WeChat: +86 134 3386 3843

End factories: whether you cannot find a marking code, or you need PCB cloning, chip decryption or turnkey PCBA, contact us directly. Our capacity is limited, so we are temporarily unable to serve repair work or trading companies — thank you for your understanding.

Scan to add us on WeChat Scan to add us on WeChat

PCB Cloning / Chip Decryption Service

From one sample board to complete schematics, PCB files and a BOM

On this pageWhat is cloningCapabilityTwo methodsWorkflowOrder processNotesFAQMore services

What is PCB cloning?

PCB cloning is the process of extracting and reconstructing the PCB files of an electronic product, then using those files to clone the board. In the broad sense it also covers modifying board files, extracting 3D data from the product enclosure and reproducing the mould, replicating the components on the board, decrypting protected chips or microcontrollers, and disassembling the system software — every technical step needed to clone an electronic product as a whole.

Cloning capability

ItemCapabilityPrecision
PrecisionUnlimited±0.025mm (1mil)
Max layersUp to 64 layers—
Max board size640mm × 640mm—
Min trace width0.01mm (rigid) / 0.005mm (flex)±0.01mm
Min trace space0.01mm (rigid) / 0.005mm (flex)±0.01mm
Min mechanical via0.15mm (rigid) / 0.1mm (flex)±0.01mm
Min laser via0.1mm±0.01mm
Blind via types1-4 step laser blind vias20+ types

Destructive vs non-destructive cloning

Pick the method that fits the complexity of the board and your requirements.

Destructive Cloning

Non-Destructive Cloning

Workflow

Professional handling from sample analysis to document delivery.

  1. PCB Analysis & Assessment — Visual inspection, function identified, complexity assessed
  2. Component Removal & Identification — Every part removed and numbered, measured and identified
  3. Board Scanning & Layer Extraction — Sanding plus scanning, or non-destructive X-ray scanning, to extract the artwork
  4. Deliverables — SCH schematic, PCB file and BOM (Altium / Protel / Gerber)

Order process

  1. Enquiry
  2. Quotation
  3. Customer ships the master board
  4. Deposit
  5. Component sourcing (BOM)
  6. PCB file reconstruction
  7. Prototype assembly and debugging
  8. Customer sign-off
  9. Documents and samples delivered
  10. Balance settled

Quick order

A short path for straightforward cloning jobs.

  1. Send photos of both sides of the sample board with dimensions, layer count and the documents you need
  2. We assess and quote
  3. Confirm the order
  4. We clone the board and ship it out
  5. We hand over the files (PCB, BOM, schematic)

Please note

PCB cloning

BOM

Schematic

FAQ

Do you guarantee 100% success?

The PCB file is guaranteed. The BOM is usually fine too, though worn, custom or obsolete parts can occasionally make the finished assembly fail — this is uncommon.

What if the cloned board does not work and needs debugging?

If we only did the reverse engineering and someone else fabricated or assembled the board, we do not cover debugging. If the fault proves to be ours, we take responsibility.

Related services

Everything that surrounds a PCB clone, under one roof.

Chip Decryption

PCBA Production

Performance Comparison

Documentation

Need a quote for PCB cloning or chip decryption?
Send photos of both sides of the sample board with its dimensions, layer count and the documents you need. We quote the same day.
Mr. Guo · Phone / WeChat: +86 134 3386 3843

Back to the marking code search